DescriptionColumn Name
Total number of bytes received during the periodrxBytes_r
Total receiving airtime (channel) utilization during the periodairtimeRx
Average number of concurrently connected clients during
the period
avgNumClients
Total transmitting airtime (channel) utilization during the
period
airtimeTx
Identifies the specific radio used by the APradioId
Number of failed associated clients during the periodfailedAssoc
Maximum number of concurrently connected clients during
the period
maxNumClients
Number of PHY errors during the periodphyError
AP Time WLAN Statistics
The default file name format depends on the time period specified for uploading the statistics
file:
• If the statistics file is exported daily:
statsAPTimeWlanDay_YYYY_MM_DD_hh_mm_ss_ms.csv
• If the statistics file is exported hourly:
statsAPTimeWlanHour_YYYY_MM_DD_hh_mm_ss_ms.csv where ms stands for
three-digit milliseconds.
The following table lists the attributes in the AP WLAN statistics file
Table 35: Attributes in the AP time WLAN statistics files
DescriptionField name
MAC address of the APkey
Minimum number of concurrently connected clients during
the period
minNumClients
Total number of packets that failed transmission during the
period
txFail_r
Identifies the specific WLAN ID on the APwlanId
Total number of bytes transmitted during the periodtxBytes_r
Total number of data frames received during the periodrxFrames_r
Transmit data rate in kilobits per second during the periodtxRateKbps
Number of newly associated clients during the periodnewAssoc
Data aggregation timetimeStamp
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
414
Statistics Files the Controller Exports to an FTP Server
AP Inventory
To Next Page
Loading...
