Ruckus Wireless Virtual SmartZone - Step 3: Transfer the Cluster Backup File to an FTP Server

ruckus> enable
Password: ********
ruckus#
3. Run the show diskinfo command to determine the current disk size of the node.
To complete the cluster backup successfully, the /mnt directory must have at least 50GB
(53,687,091,200 in 1K-blocks) of free disk space.
ruckus# show diskinfo
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 4128448 315520 3603216 9% /
/dev/root 4128448 315520 3603216 9% /
/dev/sda1 2064208 97208 1862144 5% /boot
/dev/mapper/vg00-lv00
41276736 5646756 33533240 15% /mnt
tmpfs 1048576 696 1047880 1% /tmp
tmpfs 3066864 0 3066864 0% /dev/shm
4. Run the backup command to start the backing up the current cluster.
ruckus# backup
Do you want to backup system in this context (yes/no)? yes
Backup process starts.
Backup process has been scheduled to run. You can check backup
version using 'show backup'.
5. Run the show backup command to verify that the cluster backup file has been created
successfully.
Step 3: Transfer the Cluster Backup File to an FTP Server
1. Log on to the controller CLI as a system administrator.
2. Enable privileged mode on the CLI.
ruckus> enable
Password: ********
ruckus#
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
453
Replacing a Controller Node
Backing Up and Restoring the Cluster