Figure 215: Configure the schedule in the Schedule Backup section
Downloading a Copy of the Configuration Backup
After you create a configuration backup, you have the option to download the backup file from
the System Configuration Backups section.
Follow these steps to download the backup file to the computer that you are using to access
the controller web interface.
1. Go to Administration > System Configuration Backup and Restore.
2. Scroll down to the System Configuration Backups section.
3. Locate the entry for the backup file that you want to download.
If multiple backup files appear on the list, use the date when you created the backup to find
the backup entry that you want.
4.
Click the icon that is in the same row as the backup file that you want to download.
Your web browser downloads the backup file to its default download folder.
NOTE: When your web browser completes downloading the backup file, you may see a
notification at the bottom of the page, similar to what is shown in Table 215.
5. Check the default download folder for your web browser and look for a file that resembles
the following naming convention: {Cluster
Name}_BackupConf_{MMdd}_db_{MM}_{dd}_{HH}_{mm}.bak
For example, if the controller cluster is named ClusterA and you created the configuration
backup on September 7 at 11:08 AM, the backup file name will be:
ClusterA_BackupConf_0907_db_09_07_11_08.bak
You have completed downloading a copy of the configuration backup.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
355
Performing Administrative Tasks
Backing Up and Restoring System Configuration
To Next Page
Loading...
