Figure 57: The Swap Configuration form
Moving a Single Access Point to a Different AP Zone
Follow these steps to move a single access point from its current AP zone to a different one.
NOTE: The AP that you move will inherit the configuration of the new AP zone.
1. On the AP List page, locate the access point that you want to move to a different AP zone.
2.
Once you locate the access point, click the icon that is under the Actions column.
The Select a Destination AP Zone form appears.
3. Select the AP zone to which you want to move the access point.
4. Click OK.
You have completed moving an access point to a new AP zone.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
148
Managing Access Points
Moving a Single Access Point to a Different AP Zone
To Next Page
Loading...
