provided that it enclosed by a double quotation
mark.
Supported SSIDs in ZoneFlex Release 9.6
ZoneFlex release 9.6 supports a specific set of SSID syntaxes, which may be different from the
syntaxes supported in other releases.
Table 54: Supported SSID syntaxes in ZoneFlex 9.6
Between two and 32 charactersLengthWeb Interface
All printable ASCII characters from space (32) to
~(126)
Supported
Characters
The space character (32) cannot be the first or
last character in the SSID. Otherwise, the following
error message appears:
can only contain between 1 and 32
characters, including characters
from ! (char 33) to ~ (char 126).
Exceptions
Between two and 32 charactersLengthCLI
All printable ASCII characters from space (32) to
~ (126)
Supported
Characters
The space character (32) can be placed anywhere
in the SSID (including the beginning or end)
Exceptions
provided that it enclosed in a double quotation
mark (for example, “Ruckus Wireless SSID”).
ZoneFlex AP SSID Syntax
The following sections describe the supported SSID syntax in the following ZoneFlex AP release
versions:
Supported SSIDs in Releases 9.8, 9.7, and 9.6
ZoneFlex release 9.8, 9.7, and 9.6 support a specific set of SSID syntaxes, which may be different
from the syntaxes supported in other releases.
Table 55: Supported SSID syntaxes in ZoneFlex AP 9.8, 9.7, and 9.6
Between one and 32 charactersLengthWeb Interface
All printable ASCII characters from space (32) to
~(126)
Supported
Characters
Between one and 32 charactersLengthCLI
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
465
SCG SSID Syntax
ZoneFlex AP SSID Syntax