Ruckus Wireless Virtual SmartZone - Tenant Time Radio Statistics

Tenant Time Radio Statistics
The default file name format depends on the time period specified for uploading the statistics
file:
• If the statistics file is exported daily:
statsTenantTimeRadioDay_YYYY_MM_DD_hh_mm_ss_ms.csv
• If the statistics file is exported hourly:
statsTenantTimeRadioHour_YYYY_MM_DD_hh_mm_ss_ms.csv where ms stands for
three-digit milliseconds.
The following table lists the attributes in the tenant time radio statistics file.
Table 41: Attributes in the tenant time radio statistics file
DescriptionColumn Name
Tenant identitykey
Total number of data frames received during the periodrxDataFrames_r
Minimum number of connected clients (concurrent) during
the period
minNumClients
Total number of data frames transmitted during the periodtxDataFrames_r
Total number of bytes transmitted during the periodtxBytes_r
Transmitted data rate expressed in kilobits per second for
the period
txRateKbps
Total number of management frames received during the
period
rxMgmtFrames_r
Data aggregation timetimestamp
Total number of data frames transmitted during the periodtxFrames_r
Total number of bytes received during the periodrxBytes_r
Average number of connected clients (concurrent) during
the period
avgNumClients
Total number of data bytes transmitted during the periodtxDataBytes_r
Denotes the specific radio within the APradioId
Maximum number of connected clients (concurrent) during
the period
maxNumClients
Total number of management bytes received during the
period
rxMgmtBytes_r
Total number of data bytes received during the periodrxDataBytes_r
Total number of data frames received during the periodrxFrames_r
Received data rate expressed in kilobits per second for the
period
rxRateKbps
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
423
Statistics Files the Controller Exports to an FTP Server
AP Inventory