DescriptionApplication
As an interface between SP and AAA, it performs UE authentication
and handles approval or denial of UEs to AP.
Northbound
A standard and secured method to access devices in a WPA2 hotspot
network
OnlineSignup
Handles UE Session Context details for PMIP callsPMIPv6d
Sets the RADIUS dispatch rules and synchronizes configuration to each
cluster node
RadiusProxy
Performs task scheduling and aggregates statistical dataScheduler
Provides a framework for the monitoring devices on a network. The
SNMP manager is the system is used to control and monitor the
SNMP
activities of network hosts using SNMP. As an agent that responds to
queries from the SNMP Manager, SNMP Traps with relevant details
are sent to the SNMP Manager when configured.
Maintains local user credentials for WISPr authentication.SubscriberManagement
Internal portal page for WISPr (hotspot)SubscriberPortal
Collects and sends log information from all processesSystem
Runs the controller management web serverWeb
Downloading All Logs
Follow these steps to download all available logs from the controller.
1. Go to Administration > Diagnostics.
2. On the sidebar, click Application Logs & Status.
3. In Select Control Plane, select the control plane from which you want to download logs.
4. Click the Download All Logs button.
Your web browser downloads the logs in GZIP Compressed Tar Archive (with .TGZ extension)
to its default download location.
5. Go to your web browsers default download location and verify that the TGZ file was
downloaded successfully.
6. Use your preferred compression/decompression program to extract the log files from the
TGZ file.
7. When the log files are extracted (for example, adminweb.log, cassandra.log,
communicator.log, etc.), use a text editor to open and view the log contents.
You have completed downloading all the controller logs.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
369
Performing Administrative Tasks
Working with Logs
To Next Page
Loading...
