Ruckus Wireless Virtual SmartZone - Exporting the Wireless Client List to CSV

DescriptionColumn Name
Displays the signal to noise ratio in decibelsSNR (dB)
Radio channel used by the wireless client to access the WLAN service
on the access point
Channel
Indicates whether the wireless client is authorized or unauthorized to
access the WLAN service
Status
Name of the user logged on to the wireless clientUser Name
Authentication method used by the access pointAuth Method
Encryption method used by the access pointEncryption Method
Displays the number of packets that the AP receives from the wireless
client
Packets from Client
Displays the number of data packets the AP sends to the wireless clientPackets to Client
Displays the amount of data (in bytes) the AP receives from the wireless
client
Bytes from Client
Displays the amount of data (in bytes) the AP send to the wireless clientBytes to Client
Displays the number of data packets dropped during data transmission
and reception
Dropped Packets to
Client
Displays the AP's reception signal strength in decibelsAP Rx Signal (dB)
Displays the rate at which data is transmitted by the AP to the wireless
client
AP Tx Data Rate
Icons for actions that you can perform, including:
– Click to disconnect the wireless client from the access point.
Actions
NOTE: The client is automatically unauthenticated by the WLAN if the client is connected for 48
hours in the Standard+Open/ Standard+MAC Auth authentication method, and for 12 hours in
the Standard+802.1x EAP authentication method.
Exporting the Wireless Client List to CSV
Follow these steps to export the access point list to a CSV file.
1. Go to Monitor > Clients.
2. Click the Export CSV button in the content area.
The following message appears: Downloading Client Data. Please wait...
3. When the message disappears, check the default download folder for your web browser and
look for a file named clients.csv.
4. Use a spreadsheet application (for example, Microsoft Excel
®
) to view the contents of the
CSV file.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
296
Monitoring AP Zones, Access Points, and Wireless Clients
Monitoring Wireless Clients