Table 19: Administrator activity details
DescriptionColumn Name
Date and time when the alarm was triggeredDate and Time
Name of the administrator who performed the actionAdministrator
IP address of the browser that the administrator used to log on to the
controller
Browser IP
Action performed by the administratorAction
Target of the action performed by the administrator. For example, if the
action is Create and the object is hotspot portal, this means
that the administrator created a new hotspot portal.
Resource
Displays additional details about the action. For example, if the
administrator created a new hotspot portal, this column may show the
following:
Hotspot [company_hotspot] created
Description
Using the Search Criteria Section
By default, the controller displays the 30 most recent administrator actions when you load the
Administrator Activity List page.
If you want to filter the actions that are displayed on the page (for example, you want to display
only actions that were performed by a particular admin), use the Search Criteria section.
1. Click the gray down button next to Search Criteria to expand the section.
2.
Click the icon to add a filter. Available filters include (in the order that they appear when
you click the icon:
• Date/Time
• Administrator
• Browser IP
• Object
NOTE: You do not need to use all these filters. To remove a filter from the search criteria,
click the icon next to the filter that you want to delete. The search criteria are case-sensitive.
3. Define the filters that you want to use.
For example, if you want to view all actions performed by a particular administrator for the
past month, define the date and time, and then select the name of the administrator in
Administrator.
4. Click Search.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
312
Monitoring the System, Alarms, Events, and Administrator Activity
Viewing Administrator Activity
To Next Page
Loading...
