Zone Time Radio Statistics
The default file name format depends on the time period specified for uploading the statistics
file.
• If the statistics file is exported daily:
statsZoneTimeRadioDay_YYYY_MM_DD_hh_mm_ss_ms.csv
• If the statistics file is exported hourly:
statsZoneTimeRadioHour_YYYY_MM_DD_hh_mm_ss_ms.csv
where ms stands for three-digit milliseconds.
The following table lists the attributes in the zone time radio statistics file
Table 32: Attributes in the zone time radio statistics file
DescriptionColumn Name
ID of the zonekey
Total airtime of channel utilization during the periodairtime
Minimum number of concurrently connected clients during
the period
minNumClients
Busy airtime (channel) utilization during the periodairtimeB
Total number of bytes transmitted during the periodtxBytes_r
Total number of data frames received during the periodrxFrames_r
Number of newly associated clients during the periodnewAssoc
Data aggregation timetimestamp
Total number of frames transmitted during the periodtxFrames_r
Total number of bytes received during the periodrxBytes_r
Total receiving airtime (channel) utilization during the periodairtimeRx
Average number of concurrently connected clients during
the period
avgNumClients
Total transmitting airtime (channel) utilization during the
period
airtimeTx
Identifies the specific radio used by the APradioId
Number of clients that failed to associate with the AP during
the period
failedAssoc
Maximum number of concurrently connected clients during
the period
maxNumClients
Number of PHY errors during the periodphyError
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
411
Statistics Files the Controller Exports to an FTP Server
AP Inventory
To Next Page
Loading...
