Deleting Accounting Profiles
Follow these steps to delete a single or multiple accounting profiles simultaneously.
1. Go to Configuration > Services & Profiles.
2. On the sidebar under Profiles, click Accounting.
The Accounting page appears and lists the profiles that have been configured on the
controller.
3. Delete a single or multiple profiles.
To delete a single profile:
4. From the list of existing profiles, locate the profile that you want to delete.
5.
Under the Actions column, click the icon that is in the same row as the profile.
A confirmation message appears.
6. Click Yes.
The page refreshes, and the profile that you deleted disappears from the view list.
To delete multiple profiles simultaneously, follow these steps:
7. From the list of existing profiles, locate the profiles that you want to delete.
8. Select the check boxes before the profiles that you want delete.
9. Click Delete Selected.
A confirmation message appears.
10. Click Yes.
The page refreshes and the profiles that you deleted disappears from the list.
You have completed deleting accounting profiles.
Figure 80: Deleting multiple profiles simultaneously
Working with Hotspot Profiles
A hotspot profile defines the hotspot configuration that will be used for 3rd party AP zones. This
section covers:
Creating a Hotspot Profile
A hotspot profile defines the hotspot configuration used for 3rd party AP zones.
Follow these steps to create a hotspot profile.
1. Go to Configuration > Services & Profiles.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
177
Configuring Services and Profiles
Working with Profiles
To Next Page
Loading...
