Zone Statistics
The zone statistics file contains detailed information on traffic, client associations, and AP uptime
at the zone level during the configured period of time. The default file name format depends on
the time period specified for uploading the statistics file:
• If the zone statistics file is exported daily: statsZoneDay_YYYY_MM_DD_hh_mm_ss_ms.csv
• If the zone statistics file is exported hourly:
statsZoneHour_YYYY_MM_DD_hh_mm_ss_ms.csv
where ms stands for three-digit milliseconds.
NOTE: The term "period" in the following table refers to the time interval (hourly or daily) selected
in Statistics Date Interval on the web interface.
The following table lists the attributes in the zone statistics file
Table 30: Attributes in the zone statistics file
DescriptionColumn Name
ID of the zonekey
Total airtime of channel utilization during the periodairtime
Minimum number of concurrently connected clients during
the period
minNumClients
Total number of frames received during the periodrxFrames_r
Transmit data rate in kilobits per second for the periodtxRateKbps
Receive data rate in kilobits per second for the periodrxRateKbps
Number of newly associated clients during the periodnewAssoc
Total number of bytes transmitted during the periodtxBytes_r
Total number of bytes received during the periodrxBytes_r
Data aggregation time (in Unix timestamp)timeStamp
Total number of frames transmitted during the periodtxFrames_r
Percentage of time during which the AP was up during the
period. Uptime is computed based on the up and down
events that occurred.
uptime_r
Average number of concurrently connected clients during
the period
avgNumClients
Number of failed associated clients during the periodfailedAssoc
Maximum number of concurrently connected clients during
the period
maxNumClients
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
409
Statistics Files the Controller Exports to an FTP Server
AP Inventory
To Next Page
Loading...
Need help?
General
