Ruckus Wireless Virtual SmartZone - Tenant Inventory File

DescriptionColumn Name
Total number of management bytes received during the
period
rxMgmtBytes_r
Total number of data bytes received during the periodrxDataBytes_r
Total number of data frames received during the periodrxFrames_r
Received data rate expressed in kilobits per second for the
period
rxRateKbps
Number of newly associated clients during the periodnewAssoc
Total number of management frames transmitted during the
period
txMgmtFrames_r
Total number of management bytes transmitted during the
period
txMgmtBytes_r
Zone identityzoneUUID
MAC address of the APap
Number of failed associated clients during the periodfailedAssoc
Radio channel that the AP is usingchannel
Tenant Inventory File
The tenant inventory file contains detailed information about each tenant account that has been
created on the controller.
The default tenant inventory file name format
is:tenant_YYYY_MM_DD_hh_mm_ss_ms.csvwhere ms stands for three-digit milliseconds.
The following table lists the tenant inventory statistical attributes.
Table 45: Attributes in the tenant inventory statistics
DescriptionColumn Name
Tenant identitykey
Phone number of the tenantPhone
UUID of the creatoradminUUID
Unix timestamp when the tenant was createdcreatedDatetime
City where the tenant is locatedcity
Address of the tenantaddress
Email address of the tenantemail
Description of the accountdescription
Unix timestamp when the account was last updatedmodifiedDatetime
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
428
Statistics Files the Controller Exports to an FTP Server
AP Inventory