Ruckus Wireless Virtual SmartZone - Configuring an Accounting Profile

Configuring an Accounting Profile
An accounting profile defines the accounting policy when the controller is used as a RADIUS
proxy for WLAN services.
Follow these steps to create an accounting profile.
1. Go to Configuration > Services & Profiles.
2. On the sidebar under Profiles, click Accounting.
The Accounting Profiles page appears.
3. Click Create New.
The Create New Accounting Profile form appears.
4. In Name, type a name for the authentication profile that you are adding.
5. In Description, type a brief description of the profile.
This is an optional field.
6. In Service Protocol, choose RADIUS setting.
This is the default setting.
7. In the Primary Server section, configure the settings of the primary RADIUS server.
• IP Address: Type the IP address of the AAA server.
• Port: Type the port number of the AAA server. The default RADIUS server port number is
1812 and the default RADIUS Accounting server port number is 1813.
• Shared Secret: Type the AAA shared secret.
• Confirm Secret: Retype the shared secret to confirm.
8. In the Secondary Server section, configure the settings of the secondary RADIUS server.
NOTE: The Secondary Server section is only visible if you selected the Enable backup
RADIUS server check box earlier.
• IP Address: Type the IP address of the secondary AAA server.
• Port: Type the port number of the secondary AAA server port number. The default RADIUS
server port number is 1812 and the default RADIUS Accounting server port number is
1813.
• Shared Secret: Type the AAA shared secret.
• Confirm Secret: Retype the shared secret to confirm.
9. Configure the Health Check Policy options.
These options define the health monitoring settings of the primary and secondary RADIUS
servers, when the controller is configured as RADIUS proxy for RADIUS Authentication and
Accounting messages.
DescriptionOption
Set the time (in seconds) after which, if the AAA server does not respond to
a request, the controller will initiate the "zombie period" (see below). If the
Response
Window
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
392
Overview of the Captive Portal
Configuring the Captive Portal