Ruckus Wireless Virtual SmartZone - Tenant Time WLAN Statistics

DescriptionColumn Name
Number of newly associated clients during the periodnewAssoc
Total number of management frames transmitted during
the period
txMgmtFrames_r
Total number of management bytes transmitted during the
period
txMgmtBytes_r
MAC address of the APap
Number of clients that failed to associate during the periodfailedAssoc
Radio channel that the AP is usingchannel
Tenant Time WLAN Statistics
The default file name format depends on the time period specified for uploading the statistics
file.
• If the statistics file is exported daily:
statsTenantTimeWlanDay_YYYY_MM_DD_hh_mm_ss_ms.csv
• If the statistics file is exported hourly:
statsTenantTimeWlanHour_YYYY_MM_DD_hh_mm_ss_ms.csv where ms stands for
three-digit milliseconds.
The following table lists the attributes in the tenant time WLAN statistics file.
Table 42: Attributes in the tenant time WLAN statistics
DescriptionColumn Name
Tenant identitykey
Total number of data frames received during the periodrxDataFrames_r
Minimum number of connected clients (concurrent) during
the period
minNumClients
Total number of data frames transmitted during the periodtxDataFrames_r
Total number of bytes transmitted during the periodtxBytes_r
Transmitted data rate expressed in kilobits per second for
the period
txRateKbps
Total number of management frames received during the
period
rxMgmtFrames_r
Data aggregation timetimestamp
Total number of data frames transmitted during the periodtxFrames_r
Represents the WLAN in the controller systemwsgWlanId
Total number of bytes received during the periodrxBytes_r
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
424
Statistics Files the Controller Exports to an FTP Server
AP Inventory