Ruckus Wireless Virtual SmartZone - Appendix B: Statistics Files the Controller Exports to an FTP Server; AP Inventory

Appendix
B
Statistics Files the Controller Exports to an FTP
Server
In this chapter:
• AP Inventory
If you added an FTP server to the controller, the controller will export statistics files to that FTP server,
either on demand or based on a schedule.
NOTE: The controller statistics files use Unix timestamps in milliseconds (for example, “1.40729E+12”
is Unix timestamp for “8/6/2014 2:30:00 AM”). You can use an online timestamp conversion tool to
convert Unix timestamps to human-readable timestamps.
NOTE: The file name format of the Statistics file is as follows:
<report title>-YYYY-MM-DD_HH-MM-SS-MS_ZZ
where
MS stands for three-digit milliseconds.
ZZ is a random number to avoid the file name conflict when a user subscribes to several reports but
based on the same filter. ZZ ranges between 00-99.
For example: New_Client-2015-11-17_08-00-16-031_59.csv
AP Inventory
The AP inventory file contains detailed information about each AP that the controller was managing
at the time the file was uploaded to the FTP.
The default AP inventory file name format is:
ap_YYYY_MM_DD_hh_mm_ss_ms.csv
where ms stands for three-digit milliseconds.
The following table lists the attributes in the AP inventory file.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
405
405