Table 27: Attributes in the AP inventory file
DescriptionColumn Name
MAC address of the APkey
ID of the zone to which the AP belongszoneUUID
GPS coordinates (for example, 47.633625,-122.186446)gpsSource
Unix timestamp of AP's latest connectionlastSeen
Current AP firmware versionfwVersion
Mesh role assigned to the AP. Possible values include:meshRole
• 0: Disabled
• 1: RAP
• 2: MAP
• 3: EMAP
• 4: Mesh is down
• 5: Mesh role is undefined
AP location infolocation
Time when AP reboot was startedrebootStartTime
The type of JSON stringtype
Device name assigned to the APdeviceName
Description of the APdescription
External IP address assigned to the APextIp
Registration state of the AP. Possible values include:registrationState
• 0: Pending
• 1: Approved
• 2: Rejected
GPS coordinates of the AP's location (if configured)gpsInfo
Country code assigned to the APcountryCode
Cable modem info (if the AP has a cable modem
component)
cableModemInfo
Enable 2.4GHz radioenableWlanservice24
Current connection status of the APconnectionStatus
Time AP heartbeat was lost (if any). If heartbeat has not
been lost, the value is "FALSE."
heartbeatLost
Mesh SSID used by the AP to form the meshmeshSSID
External portextPort
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
406
Statistics Files the Controller Exports to an FTP Server
AP Inventory
To Next Page
Loading...
