2. Click the icon for the widget that you want to add.
A configuration form, which contains widget settings that you can configure, appears.
3. Configure the widget settings.
4. Click OK.
The page refreshes, and then the widget that you added appears on the dashboard.
You have completed adding a widget. To add another widget, repeat the same procedure.
Figure 4: The configuration form for the Client Count Summary widget
Adding a Widget to a Widget Slot
A single widget slot can contain multiple widgets of the same size (one-slot widgets versus
two-slot widgets).
For example, you can add the client count summary widget and data throughput widget (both
are two-slot widgets) to the same widget slot.
Follow these steps to add a widget to a widget slot.
1. Locate an existing widget slot to which you want to add a widget.
2.
Click the icon that is on the upper-right hand corner of the widget slot.
A submenu appears and displays the widgets that you can add to the widget slot.
3. Click the name of the widget that you want to add to the widget slot.
The widget configuration window appears.
NOTE: You can only add a widget once. If a widget already exists in a different widget slot,
you will be unable to add it to another widget slot.
4. Configure the information that you want the widget to display and the interval at which to
refresh the information on the widget.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
26
Navigating the Web Interface
Using Widgets on the Dashboard
To Next Page
Loading...
