Continuously Disconnected APs Report
The Continuously Disconnected APs Report shows the list of access points disconnected
with specified time range.
The report can be generated based on specific management domain and AP zone.
Failed Client Associations Report
The Failed Client Associations Report shows a historical view of the number of failed client
associations.
Failed client associations can be shown in different time intervals for a specified duration. The
report can be generated based on specific management domain, AP zone, AP, SSID, or radio
type.
New Client Associations Report
The New Client Associations Report shows a historical view of the number of new client
associations.
New client Associations can be shown in different time intervals for a specified duration. The
report can be generated based on specific management domain, AP zone, AP, SSID, or radio
type.
System Resource Utilization Report
The System Resource Utilization Report shows a historical view of the CPU and memory
usage of the system.
The CPU and memory usage can be shown in different time intervals for a specific duration. The
report can be generated based on specific blade.
TX/RX Bytes Report
This TX/RX Bytes Report shows a historical view of the transmitted (TX) and received (RX) bytes
of the system.
The transmitted and received bytes can be shown in different time intervals for a specified
duration. The report can be generated based on a specific management domain, AP zone, AP,
SSID or radio type.
Creating a New Report
1. On the Saved Reports List page, click Create New.
The Create New Report form appears.
2. Perform the following steps to create a new report:
Step 1: Define the General Report Details on page 317
Step 2: Define the Resource Filter Criteria on page 317
Step 3: Define the Time Filter on page 318
Step 4: Define the Report Generation Schedule on page 319
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
316
Working with Reports
Creating a New Report
To Next Page
Loading...
