• External: Click this option if you want to use the Subscriber Portal module that is installed
on an external server. In the text box below, type the URL to the Subscriber Portal on the
external server. In the example below, the Subscriber Portal module is installed on a server
with the IP address 172.21.11.248, hence the logon URL is:
http://172.21.11.248:9997/SubscriberPortal/login
Figure 149: In Logon URL, click either Internal or External
Creating a WLAN
Now that you have created a hotspot portal, you are ready to create a hotspot WLAN.
1. In the WLAN Usage section, click Hotspot (WISPr).
2. In Hotspot Portal, select the hotspot portal that you created in Creating a Hotspot WLAN
on page 279.
3. Configure other settings are described in Working with WLANs and WLAN Groups.
4. Save the template.
NOTE: Hotspot creation requires that you select a hotspot portal to use. Make sure that you
already created a hotspot portal before you create a hotspot WLAN.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
280
Creating and Managing Hotspots
Hotspot Configuration Options
To Next Page
Loading...
