You have completed adding an authentication service to the controller.
Figure 60: The Create New Authentication Service form
RADIUS Service Options
RADIUS services authenticate profiles to specify external RADIUS services used based on the
realm value.
If you selected RADIUS in Adding an Authentication Service, you need to configure the following
options
• RFC 5580 Out of Band Location Delivery: If you want out-of-band location delivery (RFC
5580) to apply only to Ruckus Wireless APs, select the Enable for Ruckus AP Only check
box.
• Primary Server: Configure the primary RADIUS server settings.
• IP Address: Type the IP address of the RADIUS server.
• Port: Type the port number of the RADIUS server. The default RADIUS server port number
is 1812 and the default RADIUS Accounting server port number is 1813.
• Shared Secret: Type the RADIUS shared secret.
• Confirm Secret: Retype the shared secret to confirm.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
154
Configuring Services and Profiles
Configuring Authentication Services
To Next Page
Loading...
