• Actions: Displays the trash bin icon, which you can click to delete the profile
You have completed viewing a list of authentication profiles.
Figure 76: The Authentication Profiles page lists the profiles that have been created on
the controller
Deleting Authentication Profiles
Follow these steps to delete a single or multiple authentication profiles simultaneously.
1. Go to Configuration > Services & Profiles.
2. On the sidebar under Profiles, click Authentication.
The Authentication page appears and lists the profiles that have been configured on the
controller.
Delete a single or multiple profiles.
3. To delete a single profile:
a) From the list of existing profiles, locate the profile that you want to delete.
b)
Under the Actions column, click the icon that is in the same row as the profile.
A confirmation message appears.
c) Click Yes.
The page refreshes, and the profile that you deleted disappears from the view list.
4. To delete multiple profiles simultaneously, follow these steps:
a) From the list of existing profiles, locate the profiles that you want to delete.
b) Select the check boxes before the profiles that you want delete.
c) Click Delete Selected.
A confirmation message appears.
d) Click Yes.
The page refreshes and the profiles that you deleted disappears from the list.
You have completed deleting authentication profiles.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
174
Configuring Services and Profiles
Working with Profiles
To Next Page
Loading...
Need help?
General
