Figure 81: The Create New Hotspot Profile form
Viewing Hotspot Profiles
A hotspot profile defines the hotspot configuration that will be used for 3rd party AP zones.
Follow these steps to view a list of hotspot profiles that have been created on the controller.
NOTE: If you have not created a hotspot profile, refer to Creating a Hotspot Profile.
1. Go to Configuration > Services & Profiles.
2. On the sidebar under Profiles, click Hotspot.
The Hotspot Profiles page appears and displays the hotspot profiles that you have create.
For each hotspot profile, the following details are displayed:
• Profile Name
• Description
• Last Modified By
• Last Modified On
• Actions: Displays the trash bin and clone icons. Click the trash bin icon to delete the
profile. Click the clone icon to create a copy of the profile.
You have completed viewing a list of hotspot profiles.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
180
Configuring Services and Profiles
Working with Profiles
To Next Page
Loading...
