Ruckus Wireless Virtual SmartZone - Page 196

to the DHCP server. If you enabled DHCP Option 82, you can configure the following
Option 82 suboptions by selecting the corresponding check boxes:
• Subopt-1 with format: You can customize suboption 1 (Circuit ID) to send only the
AP’s MAC address in hexadecimal format or the MAC address and ESSID. The default
format is: IFName:VLAN-ID:ESSID:AP-Model:AP-Name:AP-MAC
• Subopt 2 with format: You can customize suboption 2 (Remote ID), which sends the
client’s MAC address by default, to send the AP’s MAC address, or the client MAC
plus ESSID or AP MAC plus ESSID.
• Subopt-150 with VLAN ID: This suboption encapsulates the VLAN ID.
• Subopt-151 with format: This suboption can encapsulate either the ESSID or a
configurable Area Name.
6. In Forwarding Policy Per Realm, specify the forwarding policy for each realm in the table.
Configure the following:
• APN
• APN Type
• Route Type
• Profile Name
7. In Default APN Settings, configure the following:
• No Matching Realm Found
• No Realm Specified
8. Click Create New.
You have completed adding a TTG+PDG profile.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
196
Configuring Services and Profiles
Working with Profiles