Ruckus Wireless Virtual SmartZone - Page 33

DescriptionOption
Select the country in which you are operating the access points. Different
countries and regions maintain different rules that govern which channels
Country Code
can be used for wireless communications. Setting the country code to
the proper regulatory region helps ensure that the wireless network does
not violate local and national regulatory restrictions.
Type a location name (for example, Ruckus Wireless HQ) for this AP
zone.
Location
Type additional information about the AP zone (for example, 350 W
Java Dr, Sunnyvale, CA 94089, United States).
Location
Additional
Information
Type the latitude, longitude and altitude coordinates for the AP zone's
location.
GPS Coordinates
Specify the user name and password that administrators can use to log
on directly to the managed access point's native web interface. The
following boxes are provided:
• Logon ID: Type the admin user name.
• Password: Type the admin password.
Select the time zone that you want APs that belong to this zone to use.
Options include:
Time Zone
• System defined: Click this option, and then select a time zone from
the list.
• User defined: Click this option, and then configure a custom time
zone by setting the time zone abbreviation and GMT offset and
configuring daylight saving time support.
Select the IP addressing mode that you want APs (that belong to this
zone) to use. Options include:
AP IP Mode
• IPv4 Only: choosing this option allows you to perform IPv4 network
configuration on the AP zone
• IPv6 Only: choosing this option allows you to perform IPv6 network
configuration on the AP zone
• Dual: choosing this option allows you to perform both IPv4 and IPv6
network configuration on the AP zone
4. Configure Mesh Options.
DescriptionOption
Select this check box if you want managed APs to automatically form
a wireless mesh network, in which participant nodes (APs) cooperate
to route packets.
Dual band APs can only mesh with other dual band APs, while single
band APs can only mesh with other single band APs.
Enable mesh
networking
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
33
Managing Ruckus Wireless AP Zones
Working with AP Zones