Ruckus Wireless Virtual SmartZone - Page 397

DescriptionOption
• Enable: Selection this option to enable Smart Client support.
• Only Smart Client Allowed: Select this option to allow only Smart
Clients to connect to the hotspot service.
For more information, see Configuring Smart Client Support on page
279.
Type the URL of the subscriber portal (the page where hotspot users can
log in to access the service). For more information, see Configuring the
Hotspot Logon URL on page 279.
Logon URL
Set where users will be redirected after they log in successfully:Start Page
• Redirect to the URL that user intends to visit: You could redirect
users to the page that they want to visit.
• Redirect to the following URL: You could set a different page where
users will be redirected (for example, your company website).
•
7. In the User Session section, configure the following options:
• Session Timeout: Set a time limit (in minutes) after which users will be disconnected from
the hotspot service and will be required to log on again.
• Grace Period: Set the time period (in minutes) during which disconnected users are
allowed access to the hotspot service without having to log on again.
8. In the Location Information section, configure the following options:
DescriptionOption
Type the ISO and ITU country and area code that the AP includes in
accounting and authentication requests. The required code includes:
Location ID
• isocc (ISO-country-code): The ISO country code that the AP includes
in RADIUS authentication and accounting requests.
• cc (country-code): The ITU country code that the AP includes in
RADIUS authentication and accounting requests.
• ac (area-code): The ITU area code that the AP includes in RADIUS
authentication and accounting requests.
• network
The following is an example of what the Location ID entry should look
like: isocc=us,cc=1,ac=408,network=RuckusWireless
Type the name of the location of the hotspot service.Location Name
9. In Walled Garden, click Create New to add a walled garden.
A walled garden is a limited environment to which an unauthenticated user is given access
for the purpose of setting up an account.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
397
Overview of the Captive Portal
Configuring the Captive Portal