Ruckus Wireless Virtual SmartZone - Page 441

• "softGREGatewayList"="xxx.xxx.xxx.xxx,
yyy,yyy.yyy.yyy"
SoftGRE Alarms
SoftGRE related alarms that APs send to the controller.
Following are the SoftGRE related alarms:
AP[{apname@apMac}] fails over from
primaryGRE[{address}] to secondaryGRE[{address}]
apSoftGRETunnelFailoverPtoS
Code: 611
Default to Trap: true
Severity: major
Attributes:
• "apMac"="xx:xx:xx:xx:xx:xx"
• "primaryGRE"="xxx.xxx.xxx.xxx
• "secondaryGRE"="xxx.xxx.xxx.xxx
AP[{apname@apMac}] fails over from
secondaryGRE[{address }] to primaryGRE[{address}]
apSoftGRETunnelFailoverStoP
Code: 612
Default to Trap: true
Severity: major
Attributes:
• "apMac"="xx:xx:xx:xx:xx:xx
• "secondaryGRE"="xxx.xxx.xxx.xxx"
• "primaryGRE"="xxx,xxx.xxx.xxx"
AP [{apname@apMac}] is able to reach [{softgreGW}]
[{softgreGWAddress}] successfully
apSoftGREGatewayReachable
Code: 613
Default to Trap: true
Severity: informational
Attributes:
• "apMac"="xx:xx:xx:xx:xx:xx"
• "softgreGW"="primaryGRE"
• "softgreGWAddress"="xxx.xxx.xxx.xxx"
AP [{apname@apMac }] is unable to reach the following
gateways: [{gateway list}]
apSoftGREGatewayNotReachable
Code: 614
Default to Trap: true
Severity: major
Attributes:
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
441
SoftGRE Support
Overview of SoftGRE Support