• User authentication is by the local database, LDAP, Active Directory, RADIUS server or
rendered by selecting the Always Accepted option
• Supports the Walled Garden approach to allow user access to specific areas within the
network
External Portal
• Allows customization of the portal pages through external services
• Supports Northbound Portal Interface for authentication
• User authentication is by the local database, LDAP, Active Directory, RADIUS server or
rendered by selecting the Always Accepted option
• Supports the Walled Garden approach to allow user access to specific areas within the
network
• Allows redirecting user web pages
Rate Limiting Ranges for Policies
You can define and apply rate limit values for user devices to control the data rate and types of
network traffic the device transmits.
NOTE:
For SmartZone release 3.4 and 3.2.x, the APs support the following rate limiting values:
• 0.10Mbps
• 0.25Mbps - 20.00Mbps (increments by 0.25Mbps)
• 21.00Mbps - 200.00Mbps (increments by1.00mpbs)
For example, typing 6.45 Mbps maps to the closest predefined rate value, so 6.45Mbps will be
rendered as 6.50Mbps.
NOTE:
For SmartZone release 3.1.x, the APs support the following rate limiting values:
• 0.10Mbps
• 0.25Mbps - 20.00Mbps (increments by 0.25Mbps)
• 30.00Mbps
• 40.00Mbps
• 50.00Mbps
For example, typing 31.50 Mbps maps to the closest predefined rate value, so 31.50 Mbps will
be rendered as 40 Mbps. Any rate greater than 50.00Mbps would be mapped to the maximum
rate which is 50.00Mbps.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
79
Managing Ruckus Wireless AP Zones
Working with WLANs and WLAN Groups
To Next Page
Loading...
