e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 44
(7) Press the [INITIALIZE] button to perform the initialization of the SRAM board (for the LGC
board).
Fig. 9-71
(8) Perform “Destination display at SRAM initialization” (08-9060), and check whether the same
destinations are displayed for the SYS board and the LGC board of the SRAM boards.
Fig. 9-72
To Next Page
Loading...
