4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 169
e. Set the AC harnesses on the upper side and the DC harness on the lower side. Hang each of
them on 2 hooks correspondingly.
f. Be sure that the AC harness is not set on the plate. Set the connectors on the latch.
g. Pull the AC harness in the direction of the arrows.
Fig. 4-492
AC harness
e
DC harness
f
Latch
Connector
Plate
Plate
AC harness
Triple type heater lamp
f
Latch Plate
Connector
Plate
AC harness
Dual type heater lamp
g
AC harness
To Next Page
Loading...
