Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 443

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 269
4.11.15 Separation roller
(1) Take off the RADF front cover.
 P. 4-257"4.11.2 RADF front cover"
(2) Take off the RADF rear cover.
 P. 4-258"4.11.3 RADF rear cover"
(3) Remove 4 screws and take off the feeder
upper guide unit.
Fig. 4-784
(4) Remove 1 screw and open the separation
roller holder [1]. Then take off the separation
roller unit.
Notes:
Do not peel off the film [2] of the separation
roller holder since it is fixed to the RADF with
double-faced adhesive tape.
Fig. 4-785
(5) Remove 1 E-ring and 1 bushing and then
take off the separation roller.
Fig. 4-786
[2]
[1]