Toshiba e-STUDIO 6550Ce-STUDIO 5560C - Page 657

6
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SETTING ADJUSTMENT
6 - 109
(1) Remove 2 screws to take off the transport guide-1 from the fuser unit.
Fig.6-78
(2) Remove 1 screw, and take off the bracket[1].
(3) Remove 1 screw each, and take off front and rear links[2].
Fig.6-79
(4) Remove 3 screws and take off the transport guide-2 cover[1].
Fig.6-80
[
1
]
[
1
]
[
2
]
[
2
]
[
1
]