e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 208
[F500] HD partition damage
[F510] Application start error
[F520] Operating system start error
Classification Error item
Other service call The file system is abnormal.
Check item Measures
Setting • Diagnose the file system with [5] + [C] + [POWER] 1.
Check F/S, and then recover the problem partition with [5]
+ [C] + [POWER] 2. Recovery F/S.
• If it still is not recovered by performing the above, reinstall
the software after formatting the HDD with [3] + [C] +
[POWER] -> 3: Format HDD.
Replace parts Remarks
Classification Error item
Other service call The application fails to start.
Check item Measures
Setting 1. Reboot.
2. If it has still not recovered, reinstall the HDD software.
3. If it still persists after step 2, perform [3] + [C] + [POWER]
3, and then reinstall the HDD software.
Notes:
User data will be deleted when [3] + [C] + [POWER]
3 is performed.
Replace parts Remarks
Classification Error item
Other service call The operating system fails to start.
Check item Measures
Setting 1. Reboot.
2. If it has still not recovered, reinstall the HDD software.
3. If it still persists after step 2, perform [3] + [C] + [POWER]
3, and then reinstall the HDD software.
Notes:
User data will be deleted when [3] + [C] + [POWER]
3 is performed.
Replace parts Remarks
To Next Page
Loading...
