8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 207
[F140] ASIC format error
[F200] Data overwrite option (GP-1070) disabled
Check item Measures
Setting 1. Check the bad sector of the HDD (08-9072). If the result is
“NG”, replace the HDD.
Notes:
It may take more than 30 minutes to finish the
checking.
2. Perform [3] + [C] + [POWER] -> [3], and then reinstall the
HDD software.
Notes:
User data will be deleted when [3] + [C] + [POWER] ->
[3] is performed.
Replace parts Remarks
HDD
Classification Error item
Other service call ASIC formatting fails or memory acquiring fails when software
is formatted
Check item Measures
SYS board • Connector check
• Board check
Main memory • Check the installation
• Main memory check
Replace parts Remarks
SYS board
Main memory
Classification Error item
Other service call
Check item Measures
Firmware • Perform firmware installation (all firmware: OS, HDD,
SYS, PFC Firmware, Engine Main Firmware, and Scanner
Firmware) with the USB media.
Remarks:
When the function of the Data Overwrite option (GP-
1070) is deleted from the equipment, the service call
“F200” occurs
Replace parts Remarks
SYS board
To Next Page
Loading...
