e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 234
[2D12] Message reception error
[2D13] Message transmission error
[2D14] Invalid parameter
[2D15] Exceeding the maximum size for file sharing
[2D30] Directory creation failure
[2D31] File creation failure
[2D33] File access failure
Replace parts Remarks
Classification Error item
File sharing related error
Check item Measures
Setting • Turn the power OFF and then back ON. Perform the job in
error again.
Replace parts Remarks
Classification Error item
File sharing related error
Check item Measures
Setting • When a template is used, form the template again.
• If the error still occurs, turn the power OFF and then back
ON, and perform the job again.
Replace parts Remarks
Classification Error item
File sharing related error
Check item Measures
Setting • Divide the file in error into several files and retry. Or retry
the job in a single-page format.
Replace parts Remarks
Classification Error item
File sharing related error
To Next Page
Loading...
