Xerox VersaLink B7025 Service Manual

April 2017
8-89
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Product Technical Overview
Launch Issue
Stapler Assembly Carriage Rail and Move Motor
The stapler assemblies are moved into position along the carriage rail by the booklet stapler
move motor.
The booklet stapler move motor drives two rack gears, one connected to each stapler assem-
bly.
The position of the stapler assemblies is controlled by the booklet stapler move home sensor
and booklet stapler move position sensor which monitor the position of the rack gears. Refer to
Figure 38.
Figure 37 Stapler move motor
Crease Assembly
The crease assembly pre-creases sheets of paper prior to collating, stapling and stacking of
booklets.
It is installed behind the compiler within the Finisher LX and is controlled by the finisher PWB.
Refer to Figure 38.
Figure 38 Crease assembly
Crease Assembly Folder and Gears
The crease assembly consists of a folder knife motor, gears, crease blade and paper chute.
The folder knife motor raises and lowers the crease blade through one cycle of the gears.
Refer to Figure 39.
Figure 39 Crease assembly folder and gears
Booklet Stapler Move Home Sensor
and Booklet Stapler
Move Position Stapler
Booklet Stapler
Move Motor
Crease assembly
Crease
blade
Folder
knife
motor

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android