9 USING FABRIC COMMANDS
Fabric Commands 317
display xrn-fabric 317
change self-unit 317
change unit-id 318
set unit name 319
sysname 319
10 USING RSTP COMMANDS
RSTP Configuration Commands 322
display stp 322
323
display stp ignored-vlan 324
display stp tc 324
reset stp 324
stp 325
stp bpdu-protection 326
stp cost 327
stp edged-port 327
stp loop-protection 328
stp ignored vlan 329
stp mcheck 329
stp mode 330
stp pathcost-standard 331
stp point-to-point 331
stp port priority 332
stp priority 333
stp root primary 333
stp root secondary 334
stp root-protection 335
stp timeout-factor 336
stp timer forward-delay 336
stp timer hello 337
stp timer max-age 337
stp transmit-limit 338
11 USING AAA AND RADIUS COMMANDS
802.1x Configuration Commands 343
display dot1x 343
dot1x 344
dot1x authentication-method 345
dot1x dhcp-launch 346
dot1x max-user 346
dot1x port-control 347
dot1x port-method 348
dot1x quiet-period 349
To Next Page
Loading...
