Multicast Common Configuration Commands 245
register: Register interface of PIM-SM.
Description
Use the display multicast routing-table to view the information of IP
multicast routing table.
This command displays the multicast routing table information, while the display
multicast forwarding-table
command displays the multicast forwarding table
information.
Example
View the routing table information corresponding to multicast group 225.1.1.1 in
the multicast routing table.
<SW5500>system-view
System View: return to User View with Ctrl+Z
[SW5500]display multicast routing-table 225.1.1.1
Multicast Routing Table
Total 3 entries
(4.4.4.4, 224.2.149.17)
Uptime: 00:15:16, Timeout in 272 sec
Upstream interface: Vlan-interface1(4.4.4.6)
Downstream interface list:
Vlan-interface2(2.2.2.4), Protocol 0x1: IGMP
(4.4.4.4, 224.2.254.84)
Uptime: 00:15:16, Timeout in 272 sec
Upstream interface: Vlan-interface1(4.4.4.6)
Downstream interface list: NULL
(4.4.4.4, 239.255.2.2)
Uptime: 00:02:57, Timeout in 123 sec
Upstream interface: Vlan-interface1(4.4.4.6)
Downstream interface list: NULL
Matched 3 entries
Table 44 Information from the display multicast routing-table Command
Field Description
Multicast Routing Table Multicast routing table
Total 3 entries Total number of entries
(4.4.4.4, 224.2.149.17) (s,g)
Uptime: 00:15:16, Timeout in 272 sec
Upstream interface:
Vlan-interface1 (4.4.4.6)
Downstream interface:
Vlan-interface2 (2.2.2.4), Protocol 0x1:IGMP
Multicast routing entry has been active 15
min. and 16 sec.
Upstream interface vlan-interface 1 (IP
address is 4.4.4.6).
Downstream interface list: has an interface
Vlan-interface 2 (IP address is 2.2.2.4). The
downstream interface is configured with
IGMP groups.
Matched 3 entries 3 matched entries