Fujitsu Oracle SPARC M12-2 User Manual

Table 4-17
Active/Cold Replacement Procedure of Memory (continued)
Work
Order
Task Reference
12 Confirming that there is no problem with
the replacement memory
"10.5.3 Checking the FRU Status After
Maintenance"
13 Incorporating the SPARC M12-2S that
required maintenance into the physical
partition
"10.6.1 Incorporating the SPARC
M12-2S Into the Physical Partition Using
PPAR DR"
14 Incorporating I/O resources of the SPARC
M12-2S requiring maintenance into a
logical domain
"10.7 Incorporating I/O Resources Into a
Logical Domain"
15 Checking the operating condition of the
system and the I/O device usage status
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle Solaris"
*1 Install memory of the same type and at the same location as those of the faulty memory.
*2 If the replaced memory was in a SPARC M12-2S with no PCIe cards mounted, no diagnosis is necessary
(because diagnosis was performed in the previous step).
Table 4-18
Active/Cold Replacement Procedure of the BPU
Work
Order
Task Reference
1 Checking the operating condition of the
system and the I/O device usage status
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle Solaris"
2 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu
SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
3 Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
4 Releasing I/O resources of the SPARC
M12-2S requiring maintenance from a
logical domain
"9.3 Releasing I/O Resources From a
Logical Domain"
5 Releasing the SPARC M12-2S requiring
maintenance from the physical partition
"9.4.3
Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
4.2.11 Active/Cold Replacement Workflow of the BPU
You can perform active/cold replacement of the BPU in the following configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Table 4-18 shows the workflow for active/cold replacement of the BPU.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 202390

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English