Fujitsu Oracle SPARC M12-2 User Manual

* PSU#1; Status:Faulted; Serial:FEJD1245001483; (*1)
+ FRU-Part-Number:CA01022-0750-D/7060988 ;
FAN#0; Status:Normal;
FAN#1; Status:Normal;
FAN#2; Status:Normal;
(Omitted)
*1 Failed
XSCF>
ioxadm -v list
Location Type FW Ver Serial Num Part Num State
PCIBOX#2003 PCIBOX - PZ21332003 On
PCIBOX#2003/PSU#0 PSU - FEJD1245001507 CA01022-0750-D/7060988 On
PCIBOX#2003/PSU#1 PSU - FEJD1245001483 CA01022-0750-D/7060988
Off
(*1)
PCIBOX#2003/IOB IOBOARD 1150 PP133001CW CA20365-B66X 020AM/7061033 On
PCIBOX#2003/LINKBD BOARD - PP140801Z8 CA20365-B60X 009AD/7061035 On
PCIBOX#2003/FANBP FANBP - PP13310038 CA20365-B68X 005AD/7061025 On
BB#00-PCI#00 CARD 1150 PP123300S8 CA20365-B59X 001AA On
*1 Stopped
Note -
By collecting XSCF log information in USB memory, you are deleting all the data
previously collected in USB memory.
8.2.3 Gathering XSCF Log Information
XSCF log information includes the system operation status, such as detailed error
information for hardware and the firmware operation history. Use the snapshot
command of the XSCF shell to gather the log information.
Depending on the system failure status, our service engineer may request you to
gather XSCF log information. Follow
the procedure below when gathering XSCF log
information.
Of the two methods of gathering XSCF log information, one saves the information to
USB memory, and the other saves the information to the ftp server in the server
installation environment. For details, see "12.1.16 Saving a Log to a Local USB
Device,"
"12.1.17 Saving the Log via the Network on the Terminals That Use XSCF
Web," or "12.1.18 Saving the Log via the Network, on the Servers Specified With
Snapshot" in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation
and Administration Guide.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023258

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English