Fujitsu Oracle SPARC M12-2 User Manual

/BB0/CMUL/NET0/IOVNET.PF0.VF0 VF PCIE0 guest
/BB1/CMUL/NET0/IOVNET.PF0.VF0 VF PCIE8
primary#
ldm destroy-vf /BB1/CMUL/NET0/IOVNET.PF0.VF0
primary#
ldm list-io
NAME TYPE BUS DOMAIN STATUS
---- ---- --- ------ ------
(Omitted)
/BB1/CMUL/NET2/IOVNET.PF0 PF PCIE8 primary
/BB1/CMUL/NET2/IOVNET.PF1 PF PCIE8 primary
/BB0/CMUL/NET0/IOVNET.PF0.VF0 VF PCIE0 guest
#
primary
PCIE11
guest
/BB1/PCI5 /BB1/PCI5
4.
Destroy the SR-IOV virtual function.
Destroy the SR-IOV virtual function created on the SPARC M12-2S on-board
LAN of BB-ID#01.
5.
Confirm that the SR-IOV virtual function was destroyed.
The SR-IOV virtual function created on the SPARC M12-2S on-board LAN of
BB-ID#01 has now been deleted.
9.3.3 Dynamically Releasing the PCIe Endpoint From a
Logical Domain
The operation of dynamically releasing the PCIe endpoint from a logical domain
must be performed from the control domain.
Before removing the PCIe endpoint, confirm that it is not being used by the logical
domain. For details, see the manual for the software being used.
Figure 9-3
Releasing the Assignment of a
PCIe Endpoint
Table 9-4 lists the procedure for dynamically releasing a PCIe endpoint.
Chapter 9 Releasing FRUs From the System 277

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English