Fujitsu Oracle SPARC M12-2 User Manual

Table 6-24
System-Stopped/Cold Removal Procedure of the CMUU (continued)
Work
Order
Task Reference
15 Reconfiguring the I/O bus as required (*2) "3.2.18 Configuring an I/O Device" in
the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 Domain Configuration
Guide
16 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
17 Powering on all physical partitions "10.9.1 Starting the System With an
XSCF Command"
18 Checking the operating
condition of the
physical partition and logical domains (*1)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
19 Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
*1 Reconfigure logical domains as required. For details, see "Chapter 5 Logical Domain Configuration Example"
in the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide.
*2 When reconfiguring the I/O bus, you may need to reconfigure the logical domains.
Table 6-25
System-Stopped/Cold Removal Procedure of Memory
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Releasing the assignment of memory
resources according to the total capacity
of memory after reduction
"15.2 Changing the Memory Configuration"
in the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 System Operation and
Administration Guide
3 Confirming that you can remove the
CMU to be removed (*1)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
4Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
5 Powering off all physical
partitions "9.5.2 Stopping All Physical Partitions"
6 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
6.6.4 System-Stopped/Cold Removal Workflow of
Memory
Before removing the memory, see "Precautions for memory reduction" in "7.3
Precautions for FRU Reduction."
Table 6-25 shows the workflow for system-stopped/cold removal of memory.
Chapter 6 FRU Removal Workflows 223

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English