Fujitsu Oracle SPARC M12-2 User Manual

Size (in MB)/(in sectors) : 572325/1172123567
Manufacturer : TOSHIBA
Model Number : AL13SEB600AL14SE
Firmware Revision : 37E2
Serial No : X510A007F7TD
GUID : 50000396980024c1
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 5
SAS Address : 5000039-6-c828-404e
State : Optimal
(OPT)
Size (in MB)/(in sectors) : 572325/1172123567
Manufacturer : TOSHIBA
Model Number : AL13SEB600
Firmware Revision : 3703
Serial No : 16I0A015FW28
GUID : 50000396c828404c
Protocol : SAS
Drive Type : SAS_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 500000e0:e06200a8
Numslots : 8
StartSlot : 0
Enclosure# : 2
Logical ID : 500000e0:e0b00a7f
Numslots : 9
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
8.1.3 Checking the XCP Firmware Version
Log in to the XSCF shell to check the version of the XCP firmware operating on the
SPARC M12-2/M12-2S.
The XCP firmware version may affect system operation. To investigate the cause
when a problem occurs, change the system configuration, or do likewise, check the
version of the currently operating XCP firmware.
For
details on the commands used here, see the Fujitsu SPARC M12 and Fujitsu
M10/SPARC M10 XSCF Reference Manual of the XCP firmware version used.
Checking the firmware version
To check the version of the XCP firmware running on the SPARC M12, log in to the
XSCF shell and execute the version command.
Chapter 8 Preparation for Maintenance 241

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English