Fujitsu Oracle SPARC M12-2 User Manual

Table 4-17
Active/Cold Replacement Procedure of Memory
Work
Order
Task Reference
1 Checking the operating condition of the
system and the I/O device usage status
"9.2 Checking the Operation Status and
Resource Usage Status of Oracle Solaris"
2 Checking the logical domain assignment
status of CPU resources mounted in the
SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu
SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
3 Checking the logical domain assignment
status of memory resources mounted in
the SPARC M12-2S requiring maintenance
"3.2.4 Checking the Assignment Status
of Resources" in the Fujitsu SPARC M12
and Fujitsu M10/SPARC M10 Domain
Configuration Guide
4 Releasing I/O resources of the SPARC
M12-2S requiring maintenance from a
logical domain
"9.3 Releasing I/O Resources From a
Logical Domain"
5 Releasing the SPARC M12-2S requiring
maintenance from the physical partition
"9.4.3
Dynamically Releasing the
SPARC M12-2S From the Physical
Partition"
6 Releasing the SPARC M12-2S requiring
maintenance from the building block
configuration
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
7Placing the SPARC M12-2S requiring
maintenance into the cold state, and
remo ving memory from the SPARC M12-2S
"17.4 Removing the CMU or Memory"
8 Installing memory in the SPARC M12-2S,
and placing the SPARC M12-2S that
required maintenance into the hot state
(*1)
"17.5 Installing the CMU and Memory"
9 Incorporating the SPARC M12-2S that
required maintenance into the building
block configuration
"10.4.1 Incorporating the SPARC
M12-2S Into a
Building Block
Configuration"
10 Diagnosing the SPARC M12-2S with the
replacement memory (*2)
"10.5.1 Diagnosing the SPARC M12
Hardware"
11 Diagnosing the XBU and crossbar cable
of the SPARC M12-2S with the
replacement memory
"10.5.2 Diagnosing the XBU and
Crossbar Cable"
4.2.10 Active/Cold Replacement Workflow of Memory
You can perform active/cold replacement of memory in the following configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Before replacing the memory, see "Precautions for CMU and memory replacement"
in "7.1 Precautions for FRU Replacement."
Table 4-17 shows the workflow for active/cold replacement of memory.
Chapter 4 FRU Replacement Workflows 89

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English