Fujitsu Oracle SPARC M12-2

Note
- Perform this work only when disassembling the product for disposal or recycling.
(1)
Appendix C
Removing the Lithium Battery
This appendix describes the procedure for removing the lithium battery mounted in
the XSCF unit.
■
Location of the Lithium Battery
■
Removing the Lithium Battery
C.1 Location of the Lithium Battery
This section describes the location of the lithium battery.
One lithium battery is mounted in the SPARC M12-2/M12-2S XSCF unit.
For details on removing the XSCF unit, see "11.4 Removing the XSCFU."
Figure C-1
Location of the Lithium Battery
533