Fujitsu Oracle SPARC M12-2 User Manual

#
ldm list-spconfig
factory-default (*1)
confirm_service_manual [current] (*2)
#
*1 Factory-default configuration
*2 Configuration of logical domains in operation
XSCF>
showdomainconfig -p 0
PPAR-ID :0
Booting config
(Current) :confirm_service_manual (*1)
(Next) :confirm_service_manual
-----------------------------------------------------------------------------
Index :1
config_name :factory-default (*2)
domains :1
date_created:-
-----------------------------------------------------------------------------
Index :2
config_name :config_develop_env
domains :3
date_created:'2016-05-24 19:40:55'
XSCF>
*1 Configuration of logical domains in operation
*2 Factory-default configuration
When checking from the XSCF shell
The following example shows execution of the command for checking logical domain
configuration information from the XSCF shell.
8.1.2 Checking Hardware
Log in to the XSCF shell or Oracle Solaris to check the hardware in the system
configuration and the hardware RAID volumes.
Checking the SPARC M12-2/M12-2S
To check the system information of the SPARC M12-2/M12-2S and the FRUs
mounted in it, log in to the XSCF shell and check the information displayed by the
showhardconf command.
The showhardconf command displays the following SPARC M12-2/M12-2S
information:
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023236

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English