Fujitsu Oracle SPARC M12-2 User Manual

2
1
Note -
Be careful not to mix up the removed SD card with the SD card installed in the
replacement part.
Figure 11-8
Removing the SD Card
11.5.2 Installing an SD Card
1.
Install an SD card.
Insert the SD card in which the XSCF firmware to be used is installed into the
socket of the XSCFU. Secure the SD card by pushing it until its latch locks into
place.
Figure 11-9
Installing the SD Card
Chapter 11 Maintaining the XSCF Unit 379

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English