Fujitsu Oracle SPARC M12-2 User Manual

Table 6-23
System-Stopped/Cold Removal Procedure of the HDD/SSD
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Releasing the assignment of the I/O
resources of the HDD/SSD to be removed
"9.3 Releasing I/O Resources From a
Logical Domain"
3 Confirming that you can remove the
HDD/SSD to be removed (*1)
"9.2.1
Checking the Operation Status of
Physical Partitions and Logical Domains"
4Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
5 Powering off all physical partitions "9.5.2 Stopping All Physical Partitions"
6 Switching the mode switch on the OPNL
to Service
"2.3.2 OPNL Control Function"
7Removing the power cords of all the
SPARC M12-2/M12-2S units
"9.8.2 Removing the Power Cords"
8Removing the HDD/SSD to be removed
from the SPARC M12-2/M12-2S
"15.3.1 Removing an HDD/SSD"
9 Installing the filler unit in the SPARC
M12-2/M12-2S
"15.4.2 Installing a Filler Unit"
10 Installing the power cords of all the
SPARC M12-2/M12-2S units
"10.1.1 Installing a Power Cord"
11 Powering on all physical partitions "10.9.1 Starting the System With an
XSCF Command"
12 Confirming that there is no problem with
the system from which the HDD/SSD was
removed
"10.5.3 Checking the FRU Status After
Maintenance"
13 Switching the mode switch on the OPNL
to Locked
"2.3.2 OPNL Control Function"
14 Checking the operating
condition of the
physical partition and logical domains (*1)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
15 Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
*1 Reconfigure logical domains as required. For details, see "Chapter 3 Operations for Domain Configuration" in
the Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide. If you have reconfigured a
logical domain, save the logical domain configuration information.
6.6.2 System-Stopped/Cold Removal Workflow of the
HDD/SSD
Before removing the HDD/SSD, see "Precautions for HDD/SSD removal" in "7.3
Precautions for FRU Reduction."
Table 6-23 shows the workflow for system-stopped/cold removal of the HDD/SSD.
Chapter 6 FRU Removal Workflows 221

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English