Fujitsu Oracle SPARC M12-2 User Manual

Table 6-13
Inactive/Cold Removal Procedure of a PCIe Card
Work
Order
Task Reference
1 Checking the operating condition of the
system
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
2 Releasing the assignment of the I/O
resources of the PCIe card to be removed
"9.3 Releasing I/O Resources From a
Logical Domain"
3 Confirming that you can remove the PCIe
card to be removed
(*1)
"9.2.1 Checking the Operation Status of
Physical Partitions and Logical Domains"
4Saving logical domain configuration
information
"9.1.1 Saving Logical Domain
Configuration Information"
5 Powering off the physical partition
containing the SPARC M12-2S that
houses the PCIe card to be removed
"9.5.1 Stopping a Specific Physical
Partition"
6 Switching the mode switch
on the OPNL
to Service
"2.3.2 OPNL Control Function"
7 Releasing the SPARC M12-2S that houses
the PCIe card to be removed, from the
building block configuration
"9.6.1 Releasing the SPARC M12-2S
From the Building Block Configuration"
8Removing the PCICS in which the PCIe
card to be removed is mounted from the
SPARC M12-2S
"12.3.1 Enabling the Removal of a PCIe
Card"
Before performing removal work, be sure to check the notes on maintenance work in
the Fujitsu SPARC M12 Product Notes of the XCP version used.
Each of the following sections puts together the order of work and the tasks for each
FRU into a table. For details on each task, see
the reference shown in the table.
The following FRUs are subject to inactive/cold removal:
■
PCIe card
■
HDD/SSD
■
CMUU
■
Memory
■
PCI expansion unit
■
SPARC M12-2S
6.4.1 Inactive/Cold Removal Workflow of a PCIe Card
You can perform inactive/cold removal of a PCIe card in the following configuration:
■
Configuration connecting two or more SPARC M12-2S units to a physical partition
Before removing a PCIe card, see "Precautions for PCIe card removal" in "7.3
Precautions for FRU Reduction."
Table 6-13 shows the workflow for inactive/cold removal of a PCIe card.
Chapter 6 FRU Removal Workflows 207

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English