Fujitsu Oracle SPARC M12-2 User Manual

primary#
ldm start-reconf primary
primary#
ldm remove-io /BB1/PCI5 primary
#
shutdown -i6 -g0 -y
#
ldm add-io /BB1/PCI5 guest
2.
Release the PCIe endpoint from the control domain or the root domain.
This example releases the PCIe endpoint of /BB1/PCI5 from the control domain.
3.
Restart Oracle Solaris on the control domain or the root domain from which
the PCIe endpoint has been released.
This step is not necessary when you release
the PCIe endpoint dynamically.
4.
Incorporate the PCIe endpoint into the logical domain.
This example incorporates the PCIe endpoint of /BB1/PCI5 into the logical
domain guest.
When setting the delayed reconfiguration mode for the logical domain guest, do
so before incorporating the PCIe endpoint.
10.7.4 Incorporating the SR-IOV Virtual Function
For the procedure for creating the SR-IOV virtual function, see Table 10-4.
Fujitsu SPARC M12-2/M12-2S Service Manual
･
January 2023364

Fujitsu Oracle SPARC M12-2 Specifications

General

Brand	Fujitsu
Model	Oracle SPARC M12-2
Category	Server
Language	English